Ejector System

We are a reckoned name, which is engaged in delivering Graphite Vacuum Ejector System. The offered range of process condensers is segregated in different units as per its use/position in vacuum system. This range possesses pre-condensers that are ideally utilized for direct condensing of vapors from the process. These are eliminated from the pre-condenser by one or more ejector stages. For enabling condensation with the available water supply, absolute force of process is kept quite high. The inter-condensers are ideally utilized between the absolute force of process, when compressing of non-condensible from a process/condenser pressure to atmospheric pressure is needed by two or more stages. This range also weeds out the need of handling the motive steam from a preceding stage. Offered range is ideally utilized for condensing process vapor and motive steam form one or more preceding booster ejectors. Using condense water, the offered range aids in compressing process vapors from required low absolute to the higher absolute pressure. Also, the after condensers are utilized for steam discharging from A to Z or last stage ejector at atmospheric pressure.

Features:

• A direct contact condenser is an inexpensive way to condense motive steam in a steam jet vacuum systems
• This type of condenser could be made with non-corrosive materials that could be used in a corrosive operation
• The condenser has no moving parts, so it requires virtually no maintenance
• This type of Condenser mixes the condensing vapours and water intimately, thus causing condensation
• Due to pollution caused by direct mixing, these Condensers are now used only for applications in which vapours are clean and where initial cost is a primary factor

Advantages:

• Condensers come with a low Capital and Installation cost
• Condensers can be operated at lower absolute pressure due to smaller terminal velocity and hence less water is required for a given vacuum condition
• Floor area required is low
• With almost negligible amount of fouling, a little or no maintenance is required
• Trouble-free operation
• Shail Vac’s Condensers can be fabricated with corrosion resistant materials, rubber or any other suitable lining
• Open barometric discharge provides safe operation without an atmospheric relief valve

• Robustness 
• Dimensional accuracy 
• Seamless finish 
• Abrasion resistance 
• Resistance against corrosion

• Deodorization evaporation 
• Distillation Cooling of liquids 
• De-aeration 
• High vacuum distillation 
• Petrochemical 
• Heavy chemical 
• Food Edible Oil refining 
• Essential oil Flavoring

Backed by our expert team of professionals, are able to deliver our clients a wide gamut of Multi Nozzle Jet Ejectors. The offered product is composed with the aid of new generation technology and machinery. Moreover, these products are developed utilizing premium quality raw materials that are obtained from relevant vendors of the market.

Features:

• The uniqueness of Shail Vac’s multiple nozzle ejector is in its design and performance
• A multiple nozzle ejector usually has one nozzle on centre while remaining of the nozzles equally spaced peripherally around it
• In most of the cases, multi nozzle ejectors designed for the same conditions usually reduce steam consumption by 10% to 15% as compared to Single Nozzle Ejector
• The advantage of multiple nozzle ejectors is its much higher efficiency compared to single nozzle ejectors
• It is also considerably shorter in length than an equally rated single nozzle ejector

• Shail Vac's Ejectors are more reliable and requires less attention and maintenance. 
• Steam Jet ejectors are work horses. 
• They are simple in construction and achieve very low vacuum levels. 
• They can be operated unattended and offer exceptionally long service life.
• Flexibility of design.
• Low design vacuum is possible with the help of Steam Jet Ejectors.

• In a liquid Jet Ejector, the motive fluid is a non-compressible liquid (generally water) with no heat energy hence with a single stage centrifugal pump we can not increase its pressure much.
• As a result motive fluid velocity at the nozzle tip is very less and it affects its non-condensable load handling capacity drastically.

• In a steam jet Ejector, the motive fluid is a jet of high pressure and low velocity compressible steam  which exists  from the nozzle  at the designed suction pressure and super sonic velocity thus entraining the vapour in to the suction chamber.
• Due to the super sonic  velocity of the steam at the tip of the nozzle, its non-condensable load handling capacity is much higher than liquid jet ejectors.

• In this type of ejector system, both Liquid jet and Steam jet Ejectors are employed simultaneously to produce low absolute pressure.
• The suction of Liquid Jet Ejector is connected to the discharge of last stage of the steam jet ejector.

• Single Nozzle ejectors can be used for either critical or non-critical flow, but usually preferred for one set of design conditions only.
• Its compact size is the main advantage of the single nozzle ejector.
• It is generally used where very large compression ratios are required.

• The uniqueness of Shail Vac’s multiple nozzle ejector is in its design and performance.
• A multiple nozzle ejector usually has one nozzle on centre while remaining of the nozzles equally spaced peripherally around it.
• In most of the cases, multi nozzle ejectors designed for the same conditions usually reduce steam consumption by 10% to 15% as compared to Single Nozzle Ejector.
• The advantage of multiple nozzle ejectors is its much higher efficiency compared to single nozzle ejectors.
• It is also considerably shorter in length than an equally rated single nozzle ejector.

• Chemical
• Petrochemical
• Heavy chemical
• Food
• Edible Oil refining
• Essential oil and flavoring
• Pesticides
• RefineryFiltration

• Deodorization
• Evaporation
• Distillation
• Cooling

We are leading manufacturer, supplier and exporter of Vacuum Systems that are fabricated using excellent quality raw material sourced from reliable suppliers. These ejectors are widely used around the globe for various industrial applications. We manufacture these ejectors in strict compliance with international norms and standards. Offered product is highly efficient in performance and ensure flawlessness. Customers can avail customized ejectors from us as per their demands.

Features:

• Tough construction

• Easy installation

• Low maintenance

• Rust-proof

• Durable

Applications:

• LPG terminal

• Steel industry

• Environmental

• Pharmaceutical industry

• Steam power plants

• Petrochemical industry

• Synthetic fiber

• Food industry

• Paper industry

• Ship building

Our company is one of the leading manufacturer and supplier of Steam Jet Ejector we use premium quality of raw material in the manufacturing of our products. The ejectors which are distinguished from other types of compressors as having no moving parts, work on the principle of converting the pressure energy of a motivating fluid to velocity energy in order to entrain the suction fluid. These high quality products are offered to our clients as per their Specifications and requirements in a competitive prices.

• Distillation Process
• Cooling of liquids and solid Process
• Crystallization Process
• De-aeration Process
• Petrochemical Industry
• Heavy chemical Industry
• Food Industry
• Edible Oil refining Industry

• Steam Jet ejectors are work horses
• They are simple in construction and achieve very low vacuum levels
• They can be operated unattended and offer exceptionally long service life
• Flexibility of design
• Low design vacuum is possible with the help of Steam Jet Ejectors

We have made available a vast array of Vacuum Ejector for our esteemed customers. Offered ejectors are fabricated with premium quality raw material procured from reliable suppliers. Our expert professionals make optimum utilization of advance technology and hi-tech equipment to fabricate these highly efficient ejectors. These ejectors confirms to the international norms and standards and are made available in market by us at market-leading prices.

Features:

• Low maintenance

• Cost-effective

• High tensile strength

• Resistance against corrosion

Applications:

• Steam power plants

• Petrochemical industry

• Synthetic fiber industry

• Food industry

• Paper industry

• Ship building

• LPG terminal

• Steel industry

• Environmental

• Pharmaceutical

Backed by our industrial expertise, we are able to come forth with finest quality of Liquid and Steam Jet Ejector System. Our engineers take utmost care in designing and fabricating ejectors so that our customers get a reliable and performance oriented vacuum systems. Moreover, these high quality products assures long durability with high performance.

Features:

• Highly durable

• Finest quality

• Client-based